Scissor Lift License Kelowna

Scissor Lift License Kelowna - The is an inherent chance in operating a scissor lift, since with all kinds and types of powered work tools will require correct handling in order to avoid accidents that might cause injuries or damage. Businesses have to make sure that employees operating this equipment have the required training.

Unqualified personnel should not be allowed by their companies to utilize scissor lifts. The lift is designed to raise people and materials to varied heights. Failure to know and completely abide by safety standard can result in damage to the lift or injuries for users.

For those who use scissor lifts, there is no legislation governing the use of fall protection. However, manufacturers could recommend the use of fall protection and in several situations tying off in scissor lifts may be required by employer rules, local regulations or job-specific risk assessment.

Prior to utilizing the equipment, the scissor-lift operator must carry out a thorough check to ensure the equipment is in good working order. This is the operator's duty, even if the unit has already been in service that day. The operator's guidebook of the machinery contains a pre-operation checklist.

The things that an operator must look for when performing a scissor lift check, includes checking tire-inflation pressure, and checking platform controls and ground controls in order to make certain they are working. Look for any delayed movement on the fly section when the boom is retracting and extending since this can indicate some cables are loose. When operating the controls, make sure that the emergency stop switches work. Operate functions against the equipment's cutout switches. Check the boom control system by cycling a boom lift to the furthest extent of its operating envelope. Safety limiters should stop the unit automatically before it moves into an unstable position, if they are functioning properly. If they aren't, turn off the lift and ensure that repairs are made before using it for a second time.

Safe operating procedures should be followed always, with the levers being operated with controlled, even pressure. A control lever must never be pushed from one position to the opposite position. The lever must be shifted to neutral, before stopping, and afterward proceeding in the desired direction. When released, control switches and levers must automatically return to the neutral position. Depress the foot switch prior to operating platform controls.

Click to Download the pdf