Boom Lift License Kelowna - Only fully licensed individuals must operate an aerial boom lift. Qualification can be attained through a combination of classroom sessions and practical training with the specific kind of aerial lift that will be utilized on the job. A License is needed for anyone who operates or works on an aerial boom lift.
Vehicle-mounted aerial devices comprise the following work vehicles: aerial ladders, extensible boom platforms, vertical towers, articulating boom platforms, and whatever combination of these types.
When using a boom lift, there are several basic safety regulations which apply to all boom lifts. Safety of the worker is a main concern while they are working inside the basket. The worker should at all times put on a body harness and lanyard, connecting it to the boom or basket. Never tie off to an equipment, an adjacent pole or a structure. Workers must stand on the floor of the basket, and never climb or sit on the basket edge. The load restrictions of the manufacturer should be followed.
Aerial lift operators should be authorized to use the equipment. The operator has to know all the aspects of the device and should have access to the manufacturers guidebook which should be kept within the lift. Operators are responsible for making certain that safety measures are followed in the operation of the lift. Testing lift controls everyday should be carried out. Position outriggers and set brakes (if they are utilized) on a stable surface or on pads. When working on a slope, utilize wheel chocks.
The aerial lift vehicle should never be moved while a worker is in the basket of an elevated boom, unless they are using machinery which are specifically designed for this. Extensible boom platforms and articulating boom made use of as employees carriers must have plainly marked, accessible, upper controls. Except in emergency situations, lower controls must not be used to override upper controls unless permission has been given by the individual inside the lift.
Do not wear tree or pole climbers shall whilst working from an aerial lift.
Do not alter the insulated part of the aerial lift.
Make sure that the booms are thoroughly checked, that the machinery is properly cradled and the outriggers are in the stowed position prior to moving.
When operating a boom lift next to power lines, make sure that the lines are di-electrically tested based on local rules.