Forklift Training Course Kelowna

Forklift Training Course Kelowna - OSHA and CSA establish criteria for forklift safety training that meets current regulations and standards. Anyone intending to use a forklift is needed to successfully complete safety training before making use of whatever kind of forklift. The accredited Forklift Operator Training Program is intended to provide trainees with the practical skills and knowledge to become an operator of a forklift.

Vehicle and Mobile Equipment safety rules that apply to forklift utilization include pre-shift inspections, and rules for loading and lifting.

Prior to a shift beginning, an inspection checklist has to be done and submitted to the Instructor or Supervisor. If whichever maintenance issue is discovered, the machinery must not be used until the problem is dealt with. To be able to indicate the machinery is out of service, the keys need to be removed from the ignition and a warning tag placed in a visible spot.

Safety rules for loading would consist of checking the forklift's load rating capacity to know how much the equipment could handle. When starting the equipment, the forks should be in the down position. Remember that there is a loss of roughly one hundred pounds carrying capacity for every inch further away from the carriage which the load is carried.

Lifting must begin with the driver moving to a stopped position approximately three inches away from the load. The mast must then be leveled until it has reached a right angle with the load. Raise the forks to one inch underneath the slot on the pallet and drive forward. Afterward lift forks four inches. Tilt back the load to secure it for moving. Drive the lift backwards if the load obscures frontal vision. Check behind and honk in order to warn other personnel. Do not allow forks to drag on the ground.

The load should be loaded by the forklift in such a way that ensures the load is secure and will not create a hazard to other objects or people. Restraining loads is necessary for materials that may shift during transport and destabilize the forklift.

In order to avoid the shifting of drums, drums can be strapped together to lessen movement. Operators of forklifts should drive slowly when moving liquids, to reduce instability in the forklift.

Click to Download the pdf